add page main keywords



Over view
The submersible hydrostatic  pressure/level transmitter series DPL100 is suitable

for depth measurement which continuously analogue  output (4…20ma) over a wide

temperature rang.

The sensor is isolated from the process by a 316L stainless steel diaphragm and

a filling liquid. The electronics are located within the hermetically sealed transmitter

housing which gives the sensor an excellent resistance to shock and vibration.

DPL100 series provide the measurement solution where in-tank problems such

as foaming, vapor and high viscosity prohibit the use of other instrumentation.



 • Highly accurate (± 0.25% Full Span)

• Ideal for wide range of liquids

• Maintenance free device

• 4-20mA analogue output

• Two-wire 24 Vdc loop-powered

• Ranges up to 30 m / 30000mm H20

• Piezoresistive silicon pressure sensor

• Fully submersible IP68

• Reverse polarity protection

• Sea water, oil and chemical  resistant

Power supply: 15 – 24Vdc

Output: 4-20ma (2-wires)

Operating temperature: -30°C to +125°C

Overload pressure: 2x sensor range

Accuracy : ± 0.25% FS
 
Level/pressure range:

0..300cm/ 0..0.3mH2O (Model DPL103)

0..600cm/ 0..0.6mH2O (Model DPL106)

0..1000cm/ 0..1mH2O (Model DPL110)

0..2000cm/ 0..2mH2O (Model DPL120)

0..3000cm/ 0..3mH2O (Model DPL130)

Cable length:   level range + 400cm

Diaphragm material:   316L stainless steel

Protection class: IP68

Explosion Protection: EExia IIC T6

•Most liquids and masses in tanks and vessels

•Chemicals with dense vapor

•Foaming liquids

•Viscous or corrosive materials

• Sea water, drinking water treatment and waste water.

• Marine applications


download pdf