Hydrostatic pressure/level transmitter series HPL300 is suitable pressure/level measurement which continuously analogue output(4…20ma) over a wide temperature rang.
The sensor is isolated from the process by a 316L stainless steel diaphragm and a filling liquid. The electronics are located in an explosion proof module.
HPL300 series provide the measurement solution where in-tank problems such as foaming, vapor and high viscosity prohibit the use of other instrumentation.

Feature
• Highly accurate (± 0.25% Full Span)
• Ideal for wide range of liquids
• Maintenance free device
• 4-20mA analogue output
• Two-wire 24 Vdc loop-powered
• Ranges up to 30 m / 30000mm H20
• Piezoresistive silicon pressure sensor
• Reverse polarity protection
• Sea water, oil and chemical resistant

The post HPL30 appeared first on Alex Sensor.

Differential pressure level transmitter series DPL50 is a DP level sensor uses two pressure sensors that are linked together electrically. This system called Electrically Remote System(ERS) which is a flexible, 2-wire, 4-20 mA calculates differential pressure (DP) using the electrical communication technique between the upper and lower pressure sensors.This technique removes the headaches of using capillary and improve the performance.
DPL50 differential pressure level transmitter provide the level measurement solution where in-tank problems such as foaming, vapor and high viscosity prohibit the use of other level instrumentation.

Feature
• Highly accurate (± 0.25% Full Span)
• Ideal for wide range of liquids
• Electrical communication between
low and high sensors
• No need to carry different lengths of capillary systems
•Track the temperature of each sensor module
• Maintenance free device
• 4-20mA analogue output
• Two-wire 24 Vdc loop-powered
• Piezoresistive silicon pressure sensor
• Reverse polarity protection
• Sea water, oil and chemical resistant

The post DPL50 appeared first on Alex Sensor.

for depth measurement which continuously analogue  output (4…20ma) over a wide

temperature rang.

The sensor is isolated from the process by a 316L stainless steel diaphragm and

a filling liquid. The electronics are located within the hermetically sealed transmitter

housing which gives the sensor an excellent resistance to shock and vibration.

DPL100 series provide the measurement solution where in-tank problems such

as foaming, vapor and high viscosity prohibit the use of other instrumentation.

The post DPL10 appeared first on Alex Sensor.